Crank position sensor is usually installed in the distributor, the control system is the most important one of the sensors. Its role is: detecting the engine speed, so-called rotation speed sensor; detects the piston top dead center position, it is also known as the only point sensor, including the detection of each cylinder for controlling the ignition TDC signal for controlling sequential spray oil first cylinder TDC signal
2013年12月1日星期日
Air temperature sensor
Automatic air conditioning system temperature sensor includes : engine coolant temperature sensor , in-car temperature Sensor Camshaft , ambient temperature sensor , evaporator temperature sensor. According to these sensor signals the control unit calculates the desired blowing air inside the cabin temperature , select the desired amount of air , and then control the air mixture inlet valve, out of air intake converter board , etc., within the temperature range set by the driver automatically adjust the temperature inside the cabin , to achieve the best , and automatic control of air conditioning on and off. One condition is that the air conditioning system refrigerant temperature higher than the room temperature, the ambient Engine Water Temperature Sensor circuit , the terminal water , poor contact or poor ground , the data stream will be displayed below the ambient temperature -30 ℃, will cause no refrigeration . Meanwhile, the engine coolant temperature sensor circuit or ground wire is bad, the signal loss of time, the cooling fan does not turn , lead to poor air conditioning cooling, will enter the fail-safe , so air conditioning stopped working
订阅:
博文评论 (Atom)
没有评论:
发表评论