Crank position sensor is usually installed in the distributor, the control system is the most important one of the sensors. Its role is: detecting the engine speed, so-called rotation speed sensor; detects the piston top dead center position, it is also known as the only point sensor, including the detection of each cylinder for controlling the ignition TDC signal for controlling sequential spray oil first cylinder TDC signal
2013年10月11日星期五
Automotive sensor characteristics
Adaptability, resistance to harsh environments cars could travel to any area on the planet , environmental conditions vary widely , both extremely cold polar regions , there are also hot climate like the equatorial region , therefore , requires that the sensor has a strong adaptability , in a - 40 ~ 80 ℃ under the conditions Needless to adjust properly. Cars may work in extremely harsh climatic conditions , sometimes the dust filled the air, sometimes stormy , so Engine Water Temperature Sensor should have a good seal , resistant to moisture, corrosion resistance . Anti-interference ability to adapt to the external sensor in addition to the harsh environment , but also on the internal able to resist all kinds of interference from the engine . Sensors are installed in the engine compartment , in addition to the engine work to withstand high temperatures and pressures , the combustion exhaust gas corrosion , but also requires a good seismic performance, strong resistance to vibration during engine operation , in addition, the engine work will produce electromagnetic waves, thus requiring sensors with anti-jamming capability. Car power ( generators, batteries , etc. ) 6 ~ 16V voltage can change, sometimes even more than 100V superposition of negative high voltage pulse , so also with anti- surge capability. High stability and reliability of various automotive parts generally require more than capable of running 10 × 104km and goes without replacement and adjustment of the technical specifications are still met . Therefore,Car Temperature Sensor must have high stability and high reliability. Inexpensive, adapt to mass production which requires consistency of the sensor is good, no complex adjustment, for automated production.
订阅:
博文评论 (Atom)
没有评论:
发表评论