YLE Coolant Temperature Sensor,YLE Crank Position Sensors,YLE Coolant Temp Sensor

Crank position sensor is usually installed in the distributor, the control system is the most important one of the sensors. Its role is: detecting the engine speed, so-called rotation speed sensor; detects the piston top dead center position, it is also known as the only point sensor, including the detection of each cylinder for controlling the ignition TDC signal for controlling sequential spray oil first cylinder TDC signal

2014年1月12日星期日

Electric torque sensor

Electric torque sensor is the power supply current through test drive motor for rotating torque parameters, YLE Automotive Temperature Sensors adopts a clamp type structure, convenient installation and use, the output is the standard current signal 4-20mA. Installation: the protection signal cable cover open, loosen the wire clamping device, the signal cable through the wire clamping device into the protective cover, the sealing surface pressure. Finally, the thread holder nut, so that the signal cable is fixed on the shield. Open YLE Engine Coolant Temperature Sensor clamp, foam will be measured wire around and adjusting winding thickness, the clip is closed after the measured wire can be fixed in the garden in the hole, no shake.

订阅：博文 (Atom)