Melt pressure sensor is installed which skills

Melt pressure sensors, mainly for high-temperature molten substance under the conditions of pressure measurement and control, and are widely used in chemical fiber plastic, spinning, polyester, rubber and plastics machinery and other equipment, high-temperature fluid medium pressure measurement and control, in the daily work plays an important role. However, during the installation process, but also need to master skills. 1, the melt pressure sensor installation to ensure proper installation hole left no metal objects or plastic extruder before cleaning up allCooling Temperature Sensor should be removed from the machine2, only when the polymer into the hot molten state to remove Crankshaft Sensor Replacement, remove immediately with a soft cloth to wipe the sensor probe diaphragm. 3, the melt pressure sensor diaphragm is the most easily damaged parts before installation Please do not fall off the protective cap while installing the same time we need to protect the sensor diaphragm. 4, the mounting hole machining according to mounting hole dimensions and size of the table of the technical requirements processing, to avoid non-standard mounting hole diaphragm abrasions caused by impact sensor is working properly. 5, in the installation process must pay attention to the portion of Car Temperature Sensor housing mounted fixed at room temperature environment. Isolated shell and high-temperature region is conducive to improve the sensor's measurement accuracy and service life. Learn melt pressure sensor is installed on our helpful, if you later need to install we encounter when we melt pressure sensor can be handy. Without cramming.