Ball-type load cell mounting base form

For the fixed base load cell installation forms, the installation will be placed in three fixed gear sensor column. Requires little in the temperature range of the occasion, its advantage is to improve the stability of the scale body, and easy installation. To prevent large current flowing through the sensor, the sensor should be installed between the load circuit sheet, to prevent the accidental large current flows and to burn. Even so, the need for large welding is best from the pressure Crank Sensor removed until after the end of a few for the load cell installed.Balls and other moving parts should be kept sliding freely, there should be stuck, corrosion and other phenomena. Pressure head by 20mm thick chromium steel, pressure head to be processed into a circular bottom, the radius of Crankshaft Position Sensor more than three times the radius of the dome, and should be heat treated to increase hardness indenter. Application of the fixed plate 45 made ​​of steel having a thickness of not less than 20mm, the levelness of the installation should not exceed ± °. Ball-type load cell mounting base form, the installation will place it in the floor with a concave notch.